<tbody id="8j44m"><track id="8j44m"></track></tbody>
    1. <th id="8j44m"><track id="8j44m"><dl id="8j44m"></dl></track></th>
      <tbody id="8j44m"><noscript id="8j44m"></noscript></tbody>
      <dd id="8j44m"><track id="8j44m"></track></dd>
    2. <rp id="8j44m"></rp>

      Skip to content Skip to navigation

      產品介紹

      Specifications:

        Wxx02 (2000 N (450lbs) Version) Wxx04 (4000 N (900 lbs) Version)
      Voltage
      Input voltage [VDC] 12 24 12 24
      Load
      Static load (Fx), maximum [N (lbs)] 2000 (450) 4000 (900)
      Dynamic load (Fx), maximum [N (lbs)] 2000 (450) 4000 (900)
      Stroke
      Stroke lengths, standard [cm (inch)] 10 (3.94), 20 (7.87), 30 (11.81), 40 (15.75), 50 (19.69)
      Speed
      Speed version 58A 54A 58A 54A 58A 58A
      Speed, no load [mm/s (inch/s)] 5.8 (0.23) 11.0 (0.43) 5.8 (0.23) 11.0 (0.43) 5.8 (0.23) 5.8 (0.23)
      Speed, rated load [mm/s (inch/s)] 4.0 (0.16) 8.0 (0.31) 4.0 (0.16) 8.0 (0.31) 4.0 (0.16) 4.0 (0.16)
      Current
      Current draw @ rated max. load [A] 4.5 9.0 2.2 4.5 9.0 4.5
      Current draw @ stall/in-rush [A] 14.0 21.0 8.0 11.0 21.0 11.0
      General Data
      End play, maximum [mm (inch)] 0.5 (0.020)
      Operating temperature limits [°C (°F)] -25 to +40 (-13 to +104) (1)
      Duty cycle, maximum [%] 10
      On-time, maximum [s] 180 90 180 90 90 90
      Life, average [cycles] 10,000
      Sound level [dBa] < 45
      Lead screw type acme
      Protection class IP67
      Anti rotation mechanism(2) yes
      Analog feedback output signal voltage [VDC] 0.5 - 4.5
      Analog feedback output signal linearity [%] 0.5
      Digital feedback input voltage [VDC] 3.8 - 24
      Digital feedback output resolution [pulses/mm] 10 5 10 5 10 10
      Compliances IEC 60601-1, CSA C22.2, AAMI ES60601-1 (3)
      Options
      • Electronic limit switches (ELS) (4)
      • ELS + low level switching (1) (5)
      • Analog or digital position feedback, with or without ELS
      • Mounting adapters turned 90°

      ?           1) Thrust is reduced at lower temperatures for 2000 N (450 lbs) high speed (54A) and 4000 N (900 lbs) units with ELS + low level switching (option E).
                 2) Prevents the extension tube from rotating if it is not fixed in the end.
                 3) 4 kN units greater than 30 cm of stroke are not ETL recognized. ETL certification available on N, E, P and D feedback options only.
                 4) Shuts off power at the end of stroke and all along the stroke at overload conditions. ELS is normally set for 120% of the rated dynamic maximum load.
                 5) Low level switching allows low level signals to control the actuator movement instead of having to switch the high amperage motor voltage.

      back to top 麻豆视传媒短视频黄入口